feat: 完成 issue #82 [树脂] 抽取树脂点位字典

core/edge-gateway/point_dict/schema.py

@@ -27,6 +27,8 @@ from typing import List
 VALID_UNITS: List[str] = [
     "℃", "kPa", "MPa", "m³/h", "m3/h", "%", "kg", "t", "t/h", "m³", "m3",
     "A", "V", "Hz", "kW", "kWh", "Pa", "bar", "mm", "L", "L/min", "m/s",
+    # 树脂行业模板（templates/resin）扩展：搅拌转速 rpm / 离子交换容量 mmol/g
+    "rpm", "mmol/g",
 ]
 
 # 合法数据类型集合

templates/resin/README.md

@@ -30,7 +30,7 @@ templates/resin/
 
 | 资产 | 对应子任务 | 说明 |
 | --- | --- | --- |
-| `point_dict.resin.csv` | #82 抽取树脂点位字典 | 反应釜/交联釜温度压力液位、搅拌转速、引发剂滴加速率、原料（苯乙烯/二乙烯苯）流量、称重/能源/蒸汽点位，协议覆盖 opcua/s7/weighing/energy/manual |
+| `point_dict.resin.csv` | #82 抽取树脂点位字典 | 反应釜/交联釜温度压力液位、搅拌转速、引发剂滴加速率、原料（苯乙烯/二乙烯苯）流量、称重/能源/蒸汽点位，协议覆盖 opcua/s7/modbus/weighing/energy（人工录入质检值经 Modbus holding 寄存器），量纲/协议与内核 schema 完全对齐，`core/edge-gateway/point_dict/validator.py` 校验通过 |
 | `kb.resin.template.yaml` | #83 树脂 RAG 知识库导出 | 吸附树脂合成工艺规范、异常处置 SOP、GB/T 离子交换树脂标准（5475/8144/8330） |
 | `cockpit.resin.yaml` | #84 树脂驾驶舱布局提取 | 四状态工艺视图（合成→交联→洗涤→干燥）、温度/转速趋势、交换容量/交联度/批产率/单吨能耗 KPI、告警面板、NL 查询入口 |
 | `version.yaml` | #85 树脂模板打包与版本发布 | 模板元信息 + 资产清单 + 基线（已交付化工AI平台） |

templates/resin/_sanity_check.py

@@ -24,6 +24,14 @@ EXPECTED_COLUMNS = [
     "sampleRate", "qualityCode", "opcNode", "protocol",
 ]
 
+# 对齐内核 schema.VALID_PROTOCOLS / VALID_UNITS（含树脂模板扩展量纲 rpm / mmol/g）
+VALID_PROTOCOLS = {"opcua", "s7", "modbus", "weighing", "energy", "simulator"}
+VALID_UNITS = {
+    "℃", "kPa", "MPa", "m³/h", "m3/h", "%", "kg", "t", "t/h", "m³", "m3",
+    "A", "V", "Hz", "kW", "kWh", "Pa", "bar", "mm", "L", "L/min", "m/s",
+    "rpm", "mmol/g",
+}
+
 # PRD 5.5 iAOP-cockpit-layout-v1 允许的 widget 类型
 ALLOWED_WIDGETS = {
     "process_view", "trend", "kpi_card", "alarm_panel", "nl_query",
@@ -49,6 +57,12 @@ def main() -> int:
         for i, row in enumerate(rows[1:], 2):
             if len(row) != len(EXPECTED_COLUMNS):
                 failures.append(f"CSV 第 {i} 行列数异常：{len(row)}")
+                continue
+            unit, protocol = row[3].strip(), row[8].strip()
+            if unit not in VALID_UNITS:
+                failures.append(f"CSV 第 {i} 行非法量纲: '{unit}'（对齐内核 schema.VALID_UNITS）")
+            if protocol and protocol not in VALID_PROTOCOLS:
+                failures.append(f"CSV 第 {i} 行非法协议: '{protocol}'（对齐内核 schema.VALID_PROTOCOLS）")
 
     # 2) YAML 资产可解析
     for rel in ("rag-kb/kb.resin.template.yaml",

templates/resin/point-dict/point_dict.resin.csv

@@ -8,8 +8,8 @@ R-801,R-801.DOSAGE,引发剂滴加速率,L/min,float,1000,true,ns=2;s=R801.Dosag
 R-802,R-802.TEMP,交联釜温度,℃,float,1000,true,ns=2;s=R802.Temp,opcua
 R-802,R-802.PRES,交联釜压力,kPa,float,1000,true,ns=2;s=R802.Pres,opcua
 R-802,R-802.LEVEL,交联釜液位,%,float,1000,true,ns=2;s=R802.Level,opcua
-X-801,X-801.CROSS,交联度,%,float,60000,true,holding:40021,manual
-X-801,X-801.EXC,交换容量,mmol/g,float,60000,true,holding:40022,manual
+X-801,X-801.CROSS,交联度,%,float,60000,true,holding:40021,modbus
+X-801,X-801.EXC,交换容量,mmol/g,float,60000,true,holding:40022,modbus
 ST-01,ST-01.FLOW,苯乙烯流量,m3/h,float,1000,true,ns=2;s=ST.Flow,opcua
 ST-01,ST-01.TANK,苯乙烯储罐液位,%,float,1000,true,ns=2;s=ST.Tank,opcua
 DVB-01,DVB-01.FLOW,二乙烯苯流量,m3/h,float,1000,true,ns=2;s=DVB.Flow,opcua